WP710A10SGD14V Datasheet, PDF (2/6 Pages) Kingbright Corporation – Low power consumption

Selection Guide
Part No.
Dice
Lens Type
WP710A10SGD14V
Super Bright Green (GaP)
Green Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
V= 14V
Min. Typ.
8
20
Viewing
Angle [1]
2θ1/2
40°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Super Bright Green
565
nm
VF=14V
λD [1]
Dominant Wavelength
Super Bright Green
568
nm
VF=14V
Δλ1/2
Spectral Line Half-width
Super Bright Green
30
nm
VF=14V
IF
Forward Current
Super Bright Green
10.5
13.5
mA
VF=14V
IR
Reverse Current
Super Bright Green
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Wavelength value is traceable to the CIE127-2007 compliant national standards.
3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
Forward Voltage
Reverse Voltage
Operating Temperature
Storage Temperature
Lead Solder Temperature [1]
Lead Solder Temperature [2]
Notes:
1. 2mm below package base.
2. 5mm below package base.
Super Bright Green
160
16
5
-40°C To +70°C
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAL0545
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: JAN/23/2015
DRAWN: P.Cheng
Units
mW
V
V
PAGE: 2 OF 6
ERP: 1101029218