WP710A10ND_15 Datasheet, PDF (2/6 Pages) Kingbright Corporation – T-1 (3mm) SOLID STATE LAMP

Selection Guide
Part No.
Dice
Lens Type
WP710A10ND
Pure Orange (GaAsP/GaP)
Orange Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 10mA
Min. Typ.
12
30
*10
*20
Viewing
Angle [1]
2θ1/2
40°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Pure Orange
607
nm
IF=20mA
λD [1]
Dominant Wavelength
Pure Orange
602
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Pure Orange
35
nm
IF=20mA
C
Capacitance
Pure Orange
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Pure Orange
2.05
2.5
V
IF=20mA
IR
Reverse Current
Pure Orange
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAL0515
APPROVED: WYNEC
REV NO: V.5A
CHECKED: Allen Liu
Pure Orange
62.5
25
145
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
DATE: JAN/19/2015
DRAWN: P.Cheng
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101025085