WP115VEYW_15 Datasheet, PDF (2/7 Pages) Kingbright Corporation – T-1 (3mm) BI-COLOR INDICATOR LAMP

Selection Guide
Part No.
Dice
Lens Type
WP115VEYW
High Efficiency Red (GaAsP/GaP)
Yellow (GaAsP/GaP)
White Diffused
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2.Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
12
30
*8
*20
10
24
*10
*24
Viewing
Angle [1]
2θ1/2
60°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
High Efficiency Red
627
Yellow
590
nm
IF=20mA
λD [1]
Dominant Wavelength
High Efficiency Red
617
Yellow
588
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
High Efficiency Red
Yellow
45
35
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
Yellow
10
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Power dissipation
75
DC Forward Current
30
Peak Forward Current [1]
160
Reverse Voltage
Operating / Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Yellow
75
30
140
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Units
mW
mA
mA
V
SPEC NO: DSAF2635
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: JAN/31/2015
DRAWN: Q.M.Chen
PAGE: 2 OF 7
ERP: 1101000788