APT1608ZGC-G Datasheet, PDF (2/5 Pages) Kingbright Corporation – 1.6X0.8mm SMD CHIP LED LAMP

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
APT1608ZGC/G
Green (InGaN)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
500 800
Viewing
Angle [1]
2θ1/2
120°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Green
520
nm
IF=20mA
λD [1]
Dominant Wavelength
Green
525
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Green
35
nm
IF=20mA
C
Capacitance
Green
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.2
4
V
IF=20mA
IR
Reverse Current
Green
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Electrostatic Discharge Threshold (HBM)
Operating Temperature
Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Values
120
30
100
5
450
-40°C To +85°C
-40°C To +85°C
SPEC NO: DSAJ8615
APPROVED: Wynec
REV NO: V.4B
CHECKED: Allen Liu
DATE: DEC/02/2015
DRAWN: L.Q.Xie
Units
mW
mA
mA
V
V
PAGE: 2 OF 5
ERP: 1203010110