 English |
|
|
|
|
|
|
|
| APT1608SEC-J4-AMT_15 Datasheet, PDF (2/6 Pages) Kingbright Corporation – 1.6X0.8mm SMD CHIP LED LAMP | |||
| |||
| ◁ |
Selection Guide
Part No.
APT1608SEC/J4-AMT
Dice
Lens Type
Super Bright Orange (AlGaInP) Water Clear
Iv (mcd) [2]
@ 20mA
Code. Min. Max.
W
1600 1900
X
1900 2300
Y
2300 2700
Z
2700 3100
*R
*400 *500
*S
*500 *700
*T
*700 *1000
*U *1000 *1300
Viewing
Angle [1]
2θ1/2
120°
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2.Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Power dissipation
PD
Reverse Voltage
VR
Junction temperature
TJ
Operating Temperature
Top
Storage Temperature
Tstg
DC Forward Current[1]
IF
Peak Forward Current [2]
IFM
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction/ambient) [1]
Rth j-a
Notes:
1. Rth(j-a) Results from mounting on PC board FR4 (pad sizeâ¥16 mm2 per pad),
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at Ta=25°C
Value
84
5
115
-40 To +100
-40 To +115
30
150
3000
460
Unit
mW
V
°C
°C
°C
mA
mA
V
°C/W
Parameter
Wavelength at peak emission IF=20mA [Typ.]
Dominant Wavelength IF=20mA [Min.]
Dominant Wavelength IF=20mA [Max.]
Spectral bandwidth at 50%ï REL MAX IF=20mA [Typ.]
Forward Voltage IF=20mA [Typ.]
Forward Voltage IF=20mA [Max.]
Reverse Current (VR = 5V) [Max.]
Symbol
ï¬ peak
ï¬ï dom [1]
ï¬ï dom [1]
ïï¬
VF [2]
IR
Value
611
598
612
17
2.2
2.8
10
Unit
nm
nm
nm
nm
V
uA
Temperature coefficient of ï¬ peak
IF=20mA, -10 ï° C⤠Tâ¤100 ï° C [Typ.]
TC ï¬ peak
0.12
nm/ï° C
Temperature coefficient of ï¬ dom
IF=20mA, -10 ï° C⤠Tâ¤100 ï° C [Typ.]
TC ï¬ dom
0.08
nm/ï° C
Temperature coefficient of VF
IF=20mA, -10 ï° C⤠Tâ¤100 ï° C [Typ.]
TCV
-1.8
mV/ï° C
Notes:
1.The dominant Wavelength (ï¬ï d) above is the setup value of the sorting machine. (Tolerance ï¬ï d : ±1nm. )
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAL3995
REV NO: V.2A
DATE: JAN/23/2015
PAGE: 2 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Q.M.Chen
ERP: 1203012228
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese