APT1608LVBC-D Datasheet, PDF (2/5 Pages) Kingbright Corporation – Low power consumption

Selection Guide
Part No.
Dice
Lens Type
APT1608LVBC/D
Blue (InGaN)
Water Clear
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 2mA
Min. Typ.
15
24
Viewing
Angle [1]
2θ1/2
120°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Min.
Typ. Max. Units
Test Conditions
λpeak
Peak Wavelength
Blue
465
nm
IF=2mA
λD [1]
Dominant Wavelength
Blue
470
nm
IF=2mA
Δλ1/2
Spectral Line Half-width
Blue
22
nm
IF=2mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
2.2
2.65
3
V
IF=2mA
IR
Reverse Current
Blue
50
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating Temperature
Storage Temperature
Note:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
Blue
90
30
100
5
-40°C To +85°C
-40°C To +85°C
SPEC NO: DSAN8390
APPROVED: WYNEC
REV NO: V.2B
CHECKED: Allen Liu
DATE: APR/28/2015
DRAWN: Q.M.Chen
Units
mW
mA
mA
V
PAGE: 2 OF 5
ERP: 1203014458