APG0603SYC-TT Datasheet, PDF (2/5 Pages) Kingbright Corporation – Wide viewing angle

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
APG0603SYC-TT
Super Bright Yellow (AlGaInP)
Water Clear
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 10mA
Min. Typ.
10
30
Viewing
Angle [1]
2θ1/2
140°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units
Test Conditions
λpeak
Peak Wavelength
Super Bright Yellow
591
nm
IF=10mA
λD [1]
Dominant Wavelength
Super Bright Yellow
589
nm
IF=10mA
Δλ1/2
Spectral Line Half-width
Super Bright Yellow
15
nm
IF=10mA
VF [2]
Forward Voltage
Super Bright Yellow
2.01
2.4
V
IF=10mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Power dissipation
48
DC Forward Current
20
Peak Forward Current [1]
100
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Units
mW
mA
mA
V
SPEC NO: DSAO2862
APPROVED: Wynec
REV NO: V.4B
CHECKED: Allen Liu
DATE: MAY/12/2016
DRAWN: M.Liu
PAGE: 2 OF 5
ERP: 1203014743