APA1606SGC Datasheet, PDF (2/5 Pages) Kingbright Corporation – 1.6x0.6mm RIGHT ANGLE SMD CHIP LED LAMP

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
APA1606SGC
Super Bright Green (GaP)
Water Clear
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
5
12
Viewing
Angle [1]
2θ1/2
110°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Super Bright Green
565
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Green
568
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Green
30
nm
IF=20mA
C
Capacitance
Super Bright Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Green
2.2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Green
10
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Units
Power dissipation
62.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
Reverse Voltage
5
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAB6283
APPROVED: Wynec
REV NO: V.13B
CHECKED: Allen Liu
DATE: AUG/02/2016
DRAWN: L.T.Zhang
PAGE: 2 OF 5
ERP: 1203000472