ACDA04-41SURKWA-F01_15 Datasheet, PDF (2/5 Pages) Kingbright Corporation – SURFACE MOUNT DISPLAY

Selection Guide
Part No.
Dice
Lens Type
ACDA04-41SURKWA-F01 Hyper Red (AlGaInP)
White Diffused
Note:
1.Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (ucd) [1]
@ 10mA
Min. Typ.
Description
14000 27000
*3600 *9600
Common Anode, Rt.
Hand Decimal.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
λpeak
Peak Wavelength
Hyper Red
645
nm
IF=20mA
λD [1]
Dominant Wavelength
Hyper Red
630
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Hyper Red
28
nm
IF=20mA
C
Capacitance
Hyper Red
35
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
1.95
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating / Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Hyper Red
75
30
185
5
-40°C To +85°C
Units
mW
mA
mA
V
SPEC NO: DSAG0241
APPROVED: WYNEC
REV NO: V.11A
CHECKED: Joe Lee
DATE: JAN/08/2015
DRAWN: Q.M.Chen
PAGE: 2 OF 5
ERP: 1352000343