AAA3528SURKCGKCT Datasheet, PDF (2/6 Pages) Kingbright Corporation – 3.5x2.8mm SURFACE MOUNT LED LAMP

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
AAA3528SURKCGKCT
Hyper Red (AlGaInP)
Green (AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
200 320
*55 *100
40
80
*40
*80
Viewing
Angle [1]
2θ1/2
120°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
λpeak
Peak Wavelength
Hyper Red
Green
λD [1]
Dominant Wavelength
Hyper Red
Green
Δλ1/2
Spectral Line Half-width
Hyper Red
Green
C
Capacitance
Hyper Red
Green
VF [2]
Forward Voltage
Hyper Red
Green
IR
Reverse Current
Hyper Red
Green
Typ.
645
574
630
570
28
20
35
15
1.95
2.1
Max.
2.5
2.5
10
10
Units
nm
nm
nm
pF
V
uA
Test Conditions
IF=20mA
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Power dissipation
75
DC Forward Current
30
Peak Forward Current [1]
185
Reverse Voltage
Operating Temperature
Storage Temperature
Green
75
30
150
5
-40°C To +85°C
-40°C To +85°C
Units
mW
mA
mA
V
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAO7360
APPROVED: Wynec
REV NO: V.1A
CHECKED: Allen Liu
DATE: MAR/10/2016
DRAWN: M.Liu
PAGE: 2 OF 6
ERP: 1201004058