AA5060PBS Datasheet, PDF (2/6 Pages) Kingbright Corporation – 5.0X6.0mm SURFACE MOUNT LED LAMP

Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary
does not scratch or damage the lens.
SPEC NO: DSAH4670
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: MAY/28/2007
DRAWN: D.M.LIU
PAGE: 2 OF 6
ERP:1201003010