AA3528AVU-AES Datasheet, PDF (2/7 Pages) Kingbright Corporation – Single Level Surface Mount CBI

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
Iv (mcd) [2]
@ 10mA
Min.
Typ.
AA3528AVU/AES
High Efficiency Red (GaAsP/GaP) Water Clear
0.7
2
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Viewing
Angle [1]
2θ1/2
60°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units
Test Conditions
λpeak
Peak Wavelength
High Efficiency Red 627
nm
IF=10mA
λD [1]
Dominant Wavelength
High Efficiency Red 617
nm
IF=10mA
Δλ1/2
Spectral Line Half-width
High Efficiency Red
45
nm
IF=10mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
1.9
2.5
V
IF=10mA
IR
Reverse Current
High Efficiency Red
10
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
Reverse Voltage
5
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +100°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAN3494
APPROVED: Wynec
REV NO: V.4B
CHECKED: Allen Liu
DATE: SEP/22/2016
DRAWN: L.T.Zhang
PAGE: 2 OF 7
ERP: 1102015729