AA2810ASESK Datasheet, PDF (2/6 Pages) Kingbright Corporation – 2.8X0.8mm RIGHT ANGLE SMD CHIP LED LAMP

Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H₂S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2443
APPROVED: WYNEC
REV NO: V.5A
CHECKED: Allen Liu
DATE: APR/22/2015
DRAWN: Q.M.Chen
PAGE: 2 OF 6
ERP: 1201005913