AA1010QW10ZC Datasheet, PDF (2/7 Pages) Kingbright Corporation – XPower

Applications
z traffic signaling.
z backlighting (illuminated advertising , general lighting).
z interior and exterior automotive lighting.
z substitution of micro incandescent lamps.
z portable light source (e.g. bicycle flashlight).
z signal and symbol luminaire for orientation.
z marker lights (e.g. steps, exit ways, etc).
z decorative and entertainment lighting.
z indoor and outdoor commercial and residential architectural lighting.
Application Notes
z Pressure or stress can damage the encapsulating material and affect the reliability of the LED. Precau-
tion should be taken to avoid pressure on the LED encapsulating surface.
z Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically grounded.
z Handling Indications
Use proper handling techniques to prevent damage to the LED surface. Minimize mechanical stress on
the LED surface during processing and handling. Do not touch the emitting surface with sharp objects to
avoid scratching or damaging the LED.
Figure 1
In general, LEDs should be handled by the sides of the
package. Handling instruments should not touch the emitting
surface of the LED package.
Figure 2
For automated pick-and-place machines, the pickup nozzle
should be larger than the size of the LED reflector area to
avoid placing excess pressure on the LED surface.
SPEC NO: DSAH7163
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE:AUG/29/2007
DRAWN: W.J.HUA
PAGE: 2 OF 7
ERP: 1201003031