AT2520QW10ZS Datasheet, PDF (1/8 Pages) Kingbright Corporation – 2.5X2.0mm SURFACE MOUNT LED LAMP

PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z Dimension: 2.5mmx 2.0mm x 0.8mm.
z Low thermal resistance.
z Ceramic package with silicone resin.
z Higher brightness LED flash.
z Small package with high efficiency.
z Surface mount technology.
z ESD protection.
z Radiation patterns optimal for camera flash.
z Enables higher resolution pictures in darken environments.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z Soldering methods: IR reflow soldering.
z RoHS compliant.
Package Dimensions
2.5X2.0mm SURFACE MOUNT LED LAMP
Part Number: AT2520QW10ZS
White
Application Note
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
Typical Applications
Digital still cameras
Camera-phones
PDAs
Room lighting
Architectural lighting
Decorative/pathway lighting
Front panel backlight
Exterior automotive lighting:
(brake lights, turn lights, backlighting)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAI2180
APPROVED: WYNEC
REV NO: V.7
CHECKED: Allen Liu
DATE: JAN/13/2009
DRAWN: Y.F.Lu
PAGE: 1 OF 8
ERP: 1212000119