APHH1005RWF_07 Datasheet, PDF (1/7 Pages) Kingbright Corporation – 1.0x0.5mm SMD CHIP LED LAMP

PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
1.0mmx0.5mm SMT LED, 0.7mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
PACKAGE: 2000PCS / REEL .
ELECTROSTATIC DISCHARGE THRESHOLD
(HBM):1000V.
TYP. COLOR TEMPERATURE:6500K
COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO
CIE1931(WHITE).
OPTICAL EFFICIENCY: 12.9 lm/W(TYP.)
COLOR REPRODUCTION INDEX:80
RoHS COMPLIANT.
Package Dimensions
1.0x0.5mm SMD CHIP LED LAMP
Part Number: APHH1005RWF/A
WHITE
Description
The source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Applications
traffic signaling.
backlighting (illuminated advertising , general lighting).
interior and exterior automotive lighting.
substitution of micro incandescent lamps.
reading lamps.
signal and symbol luminaire for orientation.
marker lights (e.g. steps, exit ways, etc).
decorative and entertainment lighting.
indoor and outdoor commercial and residential
architectural lighting.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG6504
APPROVED: WYNEC
REV NO: V.2
CHECKED: Allen Liu
DATE:JUN/04/2007
DRAWN:Y.L.LI
PAGE: 1 OF 7
ERP: 1203005570