KB3440 Datasheet, PDF (1/20 Pages) Kingbor Technology Co – Micropower Synchronous Buck-Boost DC/DC Converter

Kingbor Technology Co.,Ltd
TEL:[phone] FAX:[phone]
kB3440
Micropower Synchronous
Buck-Boost DC/DC Converter
FEATURES
■ _{Single Inductor}
■ _{Fixed Frequency Operation with Battery Voltages}
Above, Below or Equal to the Output
■ _{Synchronous Rectification: Up to 96% Efficiency}
■ _{40µA Quiescent Current in Burst Mode}^® _Operation
■ _{Up to 600mA Continuous Output Current}
■ _{No Schottky Diodes Required (VOUT < 4.3V)}
■ _{VOUT Disconnected from VIN During Shutdown}
■ _{2.5V to 5.5V Input and Output Range}
■ _{Programmable Oscillator Frequency}
from 300kHz to 2MHz
■ _{Synchronizable Oscillator}
■ _{Burst Mode Enable Control}
■ _{5 µA Shutdown Current}
■ _{Small Thermally Enhanced 10-Pin MSOP and}
(3mm × 3mm) DFN Packages
APPLICATIONS
■ _{Palmtop Computers}
■ _{Handheld Instruments}
■ _{MP3 Players}
■ _{Digital Cameras}
DESCRIPTION
The kB3440 is a high efficiency, fixed frequency, Buck-
Boost DC/DC converter that operates from input voltages
above, below or equal to the output voltage. The topology
incorporated in the IC provides a continuous transfer
function through all operating modes, making the product
ideal for single lithium-ion, multicell alkaline or NiMH
applications where the output voltage is within the battery
voltage range.
The device includes two 0.191 N-channel MOSFET
switches and two 0.221 P-channel switches. Switching
frequencies up to 2MHz are programmed with an external
resistor and the oscillator can be synchronized to an
external clock. Quiescent current is only 40µA in Burst
Mode operation, maximizing battery life in portable appli-
cations. Burst Mode operation is user controlled and can
be enabled by driving the MODE/SYNC pin high. If the
MODE/SYNC pin has either a clock or is driven low, then
fixed frequency switching is enabled.
Other features include a 1µA shutdown, soft-start con-
trol, thermal shutdown and current limit. The kB3440 is
available in the 10-pin thermally enhanced MSOP and
(3mm × 3mm) DFN packages.
TYPICAL APPLICATION
Li-Ion to 3.3V at 600mA Buck-Boost Converter
L1
10µH
3
SW1
4
SW2
V_IN = 2.7V TO 4.2V
7
kB3440
6
V_IN
V_OUT
R1
340k
+
Li-Ion
8
SHDN/SS
9
FB
C5 1.5nF
2
10
C1 *
MODE/SYNC V_C
10µF ₁
R_T
5
GND
R_T
R3
15k _R2
200k
60.4k
*1 = Burst Mode OPERATION
0 = FIXED FREQUENCY
C1: TAIYO YUDEN JMK212BJ106MG
C2: TAIYO YUDEN JMK325BJ226MM
L1: SUMIDA CDRH6D38-100
V_OUT
3.3V
600mA
C2
22µF
Efficiency vs V_IN
100
98
V_OUT = 3.3V
I_OUT = 100mA
96 ^{fOSC = 1MHz}
94
92
90
88
86
84
82
80
2.5 3.0 3.5 4.0 4.5 5.0 5.5
V_IN (V)
1