W6152A Datasheet, PDF (8/12 Pages) Keysight Technologies – X-Series Measurement Application

Key Specifications
Definitions
–– Specifications describe the performance of parameters covered by the
product warranty.
–– 95th percentile values indicate the breadth of the population (≈2σ) of
performance tolerances expected to be met in 95% of cases with a 95%
confidence. These values are not covered by the product warranty.
–– Typical values are designated with the abbreviation "typ." These are
performance beyond specification that 80% of the units exhibit with a
95% confidence. These values are not covered by the product warranty.
–– Nominal values are designated with the abbreviation "nom." These values
indicate expected performance, or describe product performance that is
useful in the application of the product, but is not covered by the product
warranty.
–– PXA specifications apply to analyzers with frequency options of 526 and
lower. For analyzers with higher frequency options, specifications are not
warranted but performance will nominally be close to that shown in this
section.
You Can Upgrade!
Options can be added
after your initial purchase.
All of our X-Series
application options are
license-key upgradeable.
Note: Data subject to change
For a complete list of specifications refer to the appropriate
Specifications Guide.
PXA: www.keysight.com/find/pxa_specifications
MXA: www.keysight.com/find/mxa_specifications
EXA: www.keysight.com/find/exa_specifications
CXA: www.keysight.com/find/cxa_specifications
Description
Channel power
8 MHz integration BW
Absolute power accuracy
20 to 30 °C
Measurement floor
Power statistics CCDF
Minimum power at RF Input
Histogram resolution
Adjacent channel power
Minimum power at RF input;
0 to 55 °C
ACPR accuracy
Offset frequency 8 MHz
PXA (N9030A)
MXA (N9020A)
EXA (N9010A)
−50 dBm (nom)
−50 dBm (nom)
−50 dBm (nom)
± 0.61 (± 0.19 dB 95%)
−85.7 dBm (typ)
± 0.82 (± 0.23 dB 95%)
−82.7 dBm (typ)
± 0.94 (± 0.27 dB 95%)
−78.7 dBm (typ)
−50 dBm (nom)
0.01 dB
−50 dBm (nom)
0.01 dB
−50 dBm (nom)
0.01 dB
−36 dBm (nom)
± 0.21 dB
−36 dBm (nom)
−36 dBm (nom)
8.0 MHz noise bandwidth, method = IBW
± 0.46 dB
± 0.98 dB
CXA (N9000A)
−50 dBm (nom)
± 1.33 (± 0.61 dB 95%)
−75.7 dBm (typ)
−50 dBm (nom)
0.01 dB
−36 dBm (nom)
± 1.43 dB
8