Language : 

V3500A Datasheet, PDF (8/10 Pages) Keysight Technologies – V3500A Handheld RF Power Meter
Specifications (continued)
Product characteristics
Power (equipped with auto-shutoff)
Operating environment
Storage compliance
EMC compliance
Pollution degree
Dimensions (W × H × D)
Calibration cycle
–– Two 1.5 V alkaline AA batteries (typical battery life: 17.5 hours1 with low battery indicator
–– USB interface cable (Standard-A to Type-B)2
–– Optional external DC power supply3 (V3500A-PWR)
–– 4 digits with backlight and auto-shutoff feature
–– Hold feature—most recent reading is shown on the display and is no longer updated
–– USB 2.0 interface with a mini-B USB connector4
–– Type N male RF connector (50 Ω characteristic impedance)
–– At 0 ° to 50 °C
–– Up to 80% RH for temperature up to 35 °C, non-condensing
–– Altitude up to 2,000 meters
–– –10 °C to 70 °C
–– Non-operating maximum humidity: 90% at 65 °C, non-condensing
Certified with
–– IEC 61326-2-1:2005/EN 61326-2-1:2006
–– Canada: ICES-001:2004
–– Australia/New Zealand: AS/NZS CISPR11:2004
Pollution Degree 2
79 mm × 134 mm × 49 mm (without N-connector)
0.5 kg
–– One year for the V3500A Handheld RF Power Meter
–– Three months for the standard shipped and optional accessories
One year
1. Typical battery life was measured in the default conditions from the factory at 500 MHz with backlight off and no USB communications.
With backlight on, typical battery life is 2.5 hours.
2. With the USB connected and providing power, and the optional external power disconnected, the V3500A will be powered from USB regardless
of whether batteries are present.
3. If the external power supply is connected, the V3500A will be powered by the external supply, regardless of whether USB power or batteries are
4. The interface is USB 2.0 compliant but with an interface speed of 12 Mbps.