N9917A Datasheet, PDF (8/48 Pages) Keysight Technologies – FieldFox Handheld Analyzers

08 | Keysight | FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz - Data Sheet
Cable and Antenna Analyzer and Vector Network Analyzer (continued)
Test port input specifications
Trace noise ¹, high power, 300 Hz IFBW, Port 1 or port 2
Frequency
N991xA, N992xA, N995xA
> 300 kHz to 20 GHz
> 20 to 26.5 GHz
> 26.5 to 30 GHz
> 30 to 50 GHz
Receiver compression
Frequency
N991xA, N992xA
500 MHz to 1 GHz
> 1 to 26.5 GHz
N995xA
2 MHz to 50 GHz
Maximum input level
N991xA, N992xA
N995xA
Immunity to interfering signals
Spec (-10 to 55 ºC)
Magnitude (dB rms)
Phase (deg rms)
± 0.004
± 0.07
± 0.007
± 0.14
± 0.007
± 0.14
± 0.008
± 0.22
Typical
Port 1 or port 2
+10 dBm, 0.15 dB compression
+10 dBm, 0.10 dB compression
+5 dBm, 0.10 dB compression
Port 1 or port 2
Average CW power
DC
+27 dBm, 0.5 watts
± 50 VDC
+25 dBm, 0.3 watts
± 40 VDC
Nominal
+16 dBm
1.  For CAT mode, increase trace noise by a factor of 5.7, as CAT mode IFBW is fixed at 10 kHz. Can use averaging in CAT mode to reduce trace noise or use VNA
mode with 300 Hz IFBW.