CX1152A Datasheet, PDF (8/32 Pages) Keysight Technologies – Device Current Waveform Analyzer

08 | Keysight | CX3300 Series Device Current Waveform Analyzer - Data Sheet
Dual Channel Current Sensor achieves a 100 dB dynamic range to visual-
ize low-power device operations
The CX1102A Dual Channel Current Sensor enables simultaneous measurements under
two different measurement ranges. For example, the primary channel is set to a 200 mA
range, while the secondary channel is to a 2 mA range (primary channel range is 50
or 100 times of secondary channel). This current sensor is very useful for low-power
applications that periodically operate in both sleep/standby state and active state.
Standby
x 100
Active
x 100
(Over range)
Standby
x 100
Offset
Time
Time
Offset current cancelled
Figure 15. The CX1103A Low Side Current Sensor
employs offset adjustable ultra-wideband
transimpedance technology, which can cancel
the large DC current offset and extract only the
required dynamic current. This feature is quite
useful to measure low-level dynamic sensor
current signals on a larger DC current.
Figure 13. Wide dynamic range measurement by the CX1102A Dual Channel Current Sensor
High input impedance digital channel minimizes load current in the probe
(CX3324A option)
The CX1152A Digital Channel is useful when you need digital triggers to measure current
synchronized with digital signals such as controller’s I/O or data bus up to 8 channels.
Unlike conventional digital probes, each probe for the CX1152A has large 10 MΩ input
resistance, which enables you to make accurate low power measurements by minimizing
the load current.
Current waveform
(14a)
Digital signals
(14b)
Figure 14a and 14b. Current waveform measurement and connection example using the Digital Channel