81134A Datasheet, PDF (8/10 Pages) Keysight Technologies – 3.35 GHz Pulse Pattern Generators

08 | Keysight | 81133A and 81134A, 3.35 GHz Pulse Pattern Generators - Data Sheet
33250A modulation
source
Delay control input
81133-34A pulse-/
pattern generator Reference
Device under
test
Infinium
Variable cross over
point at 70%
Figure 3.
Jitter modulated
with rectangle-wave
Jitter modulated
with sine-wave
Jitter modulated
with noise-
generator
Clock input
Interface
ac-coupled with optional dc termination
Impedance
50 Ohm
Termination voltage
–2.0 V…+3.0 V
Minimum amplitude
300 mV, tr < 3 ns, 50% duty cycle; sine: 6 dBm
Maximum amplitude
3 Vpp, ± 5 Vdc
Frequency measurement Yes
Period range
299 ps…66.6 ns
Period resolution
6 digits, 0.001 ps best case
Frequency range
15 MHz…3.35 GHz
Measurement resolution 100 kHz
Measurement accuracy 50 ppm
Propagation delay
Clock input to trigger output 8.4 ns nominal, fixed
Trigger output to channel output 32 ns nominal variable
Additional features
Remote interfaces
SCPI over GPIB, LAN and USB
Store/recall registers
(Non volatile memory)
9 complete settings can be saved. The last
settings are saved when power is turned off.
Start input
Modes
Interface
Impedance
Termination voltage
Transitions
Threshold
Max. level window
Start ¹
dc-coupled
50 Ohm nominal
–2.0 V…3.0 V
< 1 ns
–1.8 to +4 V
–2 to +5 V
1.  No fixed latency between assertion of start signal and start of output signal
General information
Operating temperature
Storage temperature
Humidity
Warm up
EMC
Power
Net weight
Shipping weight
Dimensions
Recalibration period
0 to +55 °C
–40 to +70 °C
95% R.H. (0 to +40 °C)
30 Minutes
Class A
100V to 240V AC nom.; 200 VA max.; 47 Hz
to 63 Hz
14.8 kg (32.6 lbs)
19 kg (41.9 lbs)
145 x 426 x 553 (mm) 5.7 x 16.75 x 21.75 (in)
3 years recommended