W9081A Datasheet, PDF (6/12 Pages) Keysight Technologies – X-Series Measurement Application

06 | Keysight | Bluetooth X-Series Measurement Application N9081A & W9081A - Technical Overview
Key Specifications
Definitions
–– Specifications describe the performance of parameters covered by the product
warranty.
–– 95th percentile values indicate the breadth of the population (≈2σ) of performance
tolerances expected to be met in 95% of cases with a 95% confidence. These values
are not covered by the product warranty.
–– Typical values are designated with the abbreviation “typ.” These are performance
beyond specification that 80% of the units exhibit with a 95% confidence. These
values are not covered by the product warranty.
–– Nominal values are designated with the abbreviation “nom.” These values indicate
expected performance, or describe product performance that is useful in the
application of the product, but is not covered by the product warranty.
Note: Data subject to change
Supported devices and standard version
Device type
Standard version
Power classes
Radio band
Bluetooth devices
Bluetooth radio frequency system specification 1.2/2.0/2.0+EDR/2.1/2.1+EDR revision 2.1.E.0
–– basic rate
–– enhanced data rate
Bluetooth Low Energy RF PHY test specification (LE RF-PHY.TS/4.0/4.2)
Class 1, class 2 and class 3
Bluetooth basic rate and EDR system:
2.400 to 2.4835 GHz ( f = 2402 +k MHz, k = 0, …,78)
Bluetooth low energy system:
2.400 to 2.4835 GHz ( f = 2402 +kx2 MHz, k = 0, …,39)
For a complete list of specifications refer to the appropriate specifications guide.
Benchtop:
PXA: www.keysight.com/find/pxa_specifications
MXA: www.keysight.com/find/mxa_specifications
EXA: www.keysight.com/find/exa_specifications
CXA: www.keysight.com/find/cxa_specifications
PXIe:
VXT: www.keysight.com/find/vxt
CXA-m: www.keysight.com/find/cxa-m