English
Language : 

U4421A Datasheet, PDF (6/15 Pages) Keysight Technologies – U4421A MIPI® D-PHY™ Protocol Exerciser/Analyzer
06 | Keysight | U4421A MIPI® D-PHY™ Protocol Exerciser/Analyzer - Data Sheet
Keysight U4421A – Analyzer Option (601) Performance Characteristics
Electrical
HSV minimum differential
LPV threshold range
Lane width
Performance
Maximum bit rate (high-speed mode)
Minimum bit rate (high-speed mode)
Maximum bit rate (low-power mode)
Minimum bit rate (low-power mode)
Raw mode LP sample resolution
Maximum data rate of probes
E5381A
E5405A
Memory
Standard
Option M04 (recommended for images)
Option M16 (recommended for video)
Protocol
Protocol version support
Display
Camera (CSI-2)
Protocol viewer
Protocol views
Protocol decoder
Simultaneous HS and LP data support
Short and long packet decode
CSI-2 and DSI-1 decode
Waveform view (Raw Mode)
Error display
SOT error display
EOT error display
Escape error display
Sequence error display
Turnaround error display
ECC, CRC error display
Contention detection
Track changes in speed (HS/LP) mode
Correlation markers
Marker measurements
Window correlation lock
100 mV
0 to 1.5 V
Up to 4 with Option 004. Analyze 1-, 2-, 3-, or 4-lane systems
1.5 Gbps
80 Mbps
10 Mbps
N/A
5 ns, typical for LP traffic; 1 ÷ bit rate for HS traffic
1.5 Gbps with 82 Ω coaxial resistor adapter, 1.0 Gbs with damped wire and 3-pin header
adapters.
1.5 Gbps
User allocated (shared among exerciser, analyzer and raw mode)
1 GB
4 GB
16 GB
Display Serial Interface (DSI) v1.1
Display Serial Interface (DSI) v1.02.00
Display Serial Interface Version 1.01.00
Display Command Set (DCS) v1.1
Display Command Set (DCS) v1.02.00
Display Command Set v1.01.00
Stereoscopic Display Formats (SDF) v1.0
Camera Serial Interface 2 v1.01.00
Camera Serial Interface 2 v1.00 (CSI-2)
Hierarchical packet-level display
Packets, header, lanes, payload, and traffic overview
Yes
Yes
Yes, user selectable
Packets and lanes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
> 1,000 user-defined
Yes, user-defined time and count measurements
Yes, user-defined