COMMANDEXPERT Datasheet, PDF (6/9 Pages) Keysight Technologies – Command Expert

06 | Keysight | Command Expert - Data Sheet
MATLAB Add-On
The Command Expert MATLAB Add-on
is a set of MATLAB functions that run
Command Expert sequences in MATLAB.
Run an entire sequence in a single
line of MATLAB code. The instrument
control sequence can be developed
in the Command Expert graphical
environment that shows full instrument
documentation and enables the ability
to rapidly find, perform, and sequence
instrument commands. The sequence can
contain a mix of SCPI, IVI-C and IVI-COM
commands.
Command Expert can also generate
MATLAB code for a sequence of SCPI
commands. The generated code uses
MATLAB and Instrument Control Toolbox.
Each SCPI command in the sequence
is translated into one or more lines of
MATLAB code.
Excel Add-In
When Command Expert is installed, a new
Command Expert tab in the Excel ribbon is
available. Select “Create/Add Sequence”
in the Command Expert Task Pane to
bring up Command Expert and build an
instrument command sequence.
Run the sequence directly from Excel. The
sequence can transfer settings data from
the Excel workbook to the instrument,
and retrieve measurement data from
the instrument directly into the Excel
workbook.
Share workbooks with other users.