W1138A Datasheet, PDF (5/14 Pages) Keysight Technologies – GPIB, USB and Instrument Control for easy PC-to-Instrument Connections

05 | Keysight | GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data Sheet
Keysight 82357B USB/GPIB Interface Converter
Features
–– Fast and easy connection to GPIB
instruments
–– Uses standard USB and IEEE-488
interfaces
–– Maximum GPIB transfer rate of
1.15 MB/s
–– Parallel polling capability
Best for
–– Easiest GPIB connectivity
–– Notebook computer GPIB connection
Connect GPIB instruments
quickly and easily to your
computer’s USB port
The Keysight 82357B USB/GPIB interface
provides a direct connection from the
USB port on your desktop and laptop
computers to GPIB instruments. Once
the software is loaded, your computer
automatically detects the 82357B when
it is connected to the USB port of the
computer.
The 82357B is a plug-and-play device. It
is also hot-pluggable, making it easy to
connect and disconnect without having
to shut down the computer. No external
power supplies are necessary.
The 82357B USB/GPIB interface
implements USB 1.1 (12 Mbits/s) and is
compatible with USB 2.0. The 82357B
USB/GPIB interface uses a thin, flexible,
high-quality USB cable that is USB
2.0-compliant. The USB cable is shielded,
and the connector is specified to 1,500
insertions, ensuring a durable connection
and reliable data transfer.
Boosting performance with simplest connectivity
82357B technical specifications
General requirements
Minimum system
Refer to page 4 for requirements in using the Keysight IO Libraries
requirements
software (included with the instrument control hardware)
Supported standards
–– Supports USB 2.0 high speed
–– Standard USB endpoints supported
–– IEEE-488.1 and IEEE-488.2 compatible
–– SICL and VISA 2.2
Unsupported GPIB modes of –– Pass Control
operation
–– Non-System Controller mode
General characteristics
Power
USB bus-powered device, +5 V, 500 mA (maximum), 200 mA
(typical)
Maximum data rate (GPIB) 1.15 MB/s
Connectors
–– Standard 24-pin IEEE-488 (GPIB)
–– Standard USB A
USB hubs
Self-powered hubs
Parallel polling
A single parallel poll can easily check up to eight individual devices
at once, corresponding to the number of data lines on the GPIB
Cable
2.5 meters, shielded, connector rated for 1,500 insertions
LED indicators
READY, ACCESS, FAIL
Maximum instrument
14 instruments—daisy chain via GPIB. A maximum of 4 converters
connection
can be connected to the PC.
Configuration
Plug-and-play
Warranty
1 year
EMC and safety
–– IEC 61010-1: 2001/EN 61010-1: 2001
–– USA: UL61010-1: 2004
–– Canada: CSA C22.2 No. 61010-1: 2004
Dimensions
Length, width, and height
105 mm (L) x 64 mm (W) x 30 mm (H) (including connectors)
Weight
215 grams
Environmental specifications
Operating environment
0 °C to 55 °C
Operating humidity
Up to 90% at 40 °C non-condensing
Storage environment
–40 °C to 70 °C
Storage humidity
Up to 90% at 65 °C non-condensing
Ordering information
Includes
Keysight IO Libraries Suite and VISA/SICL programming manuals
on CD-ROM
Accessories
GPIB cables/adapter (see page 12)