U2652A Datasheet, PDF (5/10 Pages) Keysight Technologies – U2600A Series USB Modular Isolated Digital I/O Devices

Product Speciications
Model number
Digital input
Number of isolated bits
Input type
Maximum input voltage range¹
Digital logic levels²
Input resistance
Input current (maximum)
Maximum transient voltage³
Interrupt sources
Digital output
Number of isolated bits
Output type
External supply voltage range
Voltage drop at MOSFET when on
Output sink current per bit
Maximum transient voltage
On board isolated +5 V power supply
Output voltage (Typical)
Output current (Typical)
Maximum power
General
Power consumption
Relative humidity
Storage temperature
Operating temperature
Connector type
Dimensions (W × D × H)
Remote interface
U2651A
U2652A
U2653A
32-bit
64-bit
-
Opto-isolated
Opto-isolated
-
24 V, non-polarity
24 V, non-polarity
-
High: 10 to 24 V
Low: 0 to 2 V
High: 10 to 24 V
Low: 0 to 2 V
-
24 kΩ at 0.75 W
24 kΩ at 0.75 W
-
1.5 mA per bit
1.5 mA per bit
-
1250 V
1250 V
-
peak
peak
DI_101.0/301 and
DI_101.1/302
DI_101.0/301 and
DI_101.1/302
-
32-bit
-
64-bit
Open drain power MOSFET
driver
-
Open drain power MOSFET
driver
5 V to 35 V
-
5 V to 35 V
VDrop < 1.0 V (Maximum)
-
VDrop < 1.0 V (Maximum)
500 mA (100% duty cycle)
500 mA (100% duty cycle)
per bit
400 mA (100% duty cycle)
-
per bit
400 mA (100% duty cycle)
when full 32-bit loaded
when full 32-bit loaded
1250 Vpeak
-
1250 Vpeak
+5 V
-
+5 V
150 mA
-
150 mA
0.85 W
-
0.85 W
+12 V at 235 mA (Typical) +12 V at 115 mA (Typical) +12 V at 260 mA (Typical)
Operating: 15% to 85% at 40 °C (non-condensing)
Non-operating: 90% RH at 65 °C for 24 hours
–20 to +70 °C
0 to +55 °C
100-pin SCSI-II connector
120.00 × 182.40 × 44.00 mm (with plastic casing)
105.00 × 174.54 × 25.00 mm (without plastic casing)
Hi-Speed USB 2.0
1. Maximum input voltage is 24 V with reference to DI .
COM
2. Voltage level with reference to DI .
COM
3. Maximum transient voltage between DI_in and DI_COM.
5