E1969A Datasheet, PDF (5/19 Pages) Keysight Technologies – TD-SCDMA_GSM Fast Switch Test Application

05 | Keysight | TD-SCDMA_GSM Fast Switch Test Application - Technical Overview
What to Order for TD-SCDMA
Model number
E5515C/E
E5515C-003
E5515C-002
E1969A
E1969A-101
E1969A-201
E1969A-403
E1969A-407
E1969A-408
E1969A-413
E1969A-501
E1969A-502
E1969A-503
Description
8960 Series 10 wireless communications test set
Flexible CDMA base station emulator
Second RF source
TD-SCDMA_GSM fast switch test application
TD-SCDMA non-signaling test mode
TD-SCDMA signaling mode
TD-HSDPA
TD-SCDMA Prot Log
TD-SCDMA RT Vocoder
TD-HSUPA
Inter-RAT with TD-LTE
Packet data service
Simultaneous services
Technical Specifications
These specifications apply to an E5515C mainframe with Option 003, or E5515E when used with the
latest E1969A test application. Specifications in this document focus on TD-SCDMA-related parts
of E1969A (options E1969A-101 and -201). For GSM/GPRS/EGPRS-related specifications, refer to
Keysight E1968A GSM/GPRS/EGPRS Test Application, Technical Overview (5990-4520EN).
Specifications describe the test set’s warranted performance and are valid for the unit’s operation
within the stated environmental ranges unless otherwise noted. All specifications are valid after a
30-minute warm-up period of continuous operation.
Supplemental characteristics are intended to provide typical, but non-warranted, performance pa-
rameters that may be useful in applying the instrument. These characteristics are shown in italics and
labeled as “typical”. All units shipped from the factory meet these typical numbers at +25 °C ambient
temperature without including measurement uncertainty.
1.  Minimum of 1-year (-1SY) STSC is required with initial purchase of the system. 2-year (U1908AS-2SY)
or 3-year (U1908AS-3SY) STSC is optional.
2.  Use this option number to purchase STSC renewal: 1-year, 2-year (U1908AS-2RY) or 3-year
(U1908AS-3RY), instead of using U1905A part numbers.