34401A Datasheet, PDF (5/6 Pages) Keysight Technologies – 34401A Digital Multimeter

05 | Keysight | 34401A Digital Multimeter - Data Sheet
Measurement Characteristics, continued Ordering Information
System speeds
Configuration rates
26/s to 50/s
Autorange rate (dc Volts) > 30/s
ASCII readings to RS-232 55/s
ASCII readings to GPIB
1000/s
Maximum internal trig rate 1000/s
Max. ext trig. rate to mem 1000/s
Triggering and memory
Reading HOLD sensitivity 10%, 1%, 0.1%, or 0.01% of range
Samples/trigger
1 to 50,000
Trigger delay
0 to 3600 s: 10 µs step size
External trigger delay
< 1 ms
External trigger jitter
< 500 µs
Memory
512 readings
Math functions
NULL, min/max/average, dBm, dB, limit test (with TTL output)
Standard programming languages
SCPI (IEEE-488.2), Keysight 3478A, Fluke 8840A/42A
Accessories included
Test lead kit with probe, alligator and grabber attachments
Operating manual, service manual, test report and power cord
General specifications
Power supply
100 V/120 V/220 V/240 V ± 10%
Power line frequency
45 to 66 Hz and 360 to 440 Hz,
automatically sensed at power-on
Power consumption
25 VA peak (10 W average)
Operating environment
Full accuracy for 0 to 55 °C, full accuracy to
80% R.H. at 40 °C
Storage temperature
–40 to 70 °C
Weight
3.6 kg (8.0 lbs)
Safety
Designed to CSA, UL-1244, IEC-348
RFI and ESD
MIL-461C, FTZ 1046, FCC
Vibration and shock
MIL-T-28800E, Type III, Class 5 (sine only)
Warranty
3 year
Keysight 34401A multimeter accessories included: Test lead
kit with probe, alligator, and grabber attachments, calibration
certificate, test report, and power cord. Also includes CD with:
IntuiLink software, IVI and VXI PnP drivers, Quick start tutorial,
user’s guide, command quick reference, service guide, and
data sheet.
Options
34401A-A6J
ANSI Z540 compliant calibration
Accessories
Probes/Leads/Clip accessories
11059A
Kelvin probe set
11060A
Surface mount device (SMD) test probes
11062A
Kelvin clip set
34133A
Precision electronic test leads
34134A
DC coupled current probe
34136A
High voltage probe
34138A
Test lead set
34171B
Input terminal connector (sold in pairs)
34172B
Input calibration short (sold in pairs)
34330A
30 A current shunt
E2308A
5 k thermistor probe
Y1133A
Low-thermal external digital multimeter
scanning kit
Rackmount kits
34190A Rackmount kit
34191A 2U Dual flange kit
34194A Dual lock link kit
Designed for use with only one instrument,
mounted on either the left or the right side
of the rack.
Secures the instrument to the front of the
rack. This kit can be used with the 34194A
dual lock link kit to mount two half-width,
2U height instruments side-by side.
Recommended for side-by-side
combinations and includes links for
instruments of different depths. This kit
can be used with the 34191A 2U dual flange
kit to mount two half-width, 2U height
instruments side-by-side.
Other accessories
34131A
34161A
34398A
E5810B
Hard transit case
Accessory pouch
RS-232 cable, 9 pin (f) to 9 pin (f)
LAN/GPIB gateway