U3000A Datasheet, PDF (4/9 Pages) Keysight Technologies – Electronic Instrumentation Training Kit

U3000A + Digital
Oscilloscope
The Keysight DSO3000 Series econo-
my oscilloscope represents the best
choice when used in combination
with the U3000A training board. Going
through the provided lab exercises,
you will learn to analyze various types
of signals or waveforms generated by
the U3000A training board, including
counter signals, square waves from
a 555 timer, irregular pulse waves,
triangular waves, and sinusoidal
waves.
The automatic measurement functions
of the oscilloscopes allow you to
make and display any or all different
measurements simultaneously. In
addition, you will also learn to display
a waveform in a frequency domain
using the Fast Fourier Transform
(FFT) function and to filter a mixed
sinusoidal signal using the digital
filtering technique.^†
U3000A + Function
Generator
The U3000A training board consists
of an on-board timer and a crystal
oscillator. The provided lab exercises
guide you through the necessary steps
to generate input signals using the
Keysight 33220A function generator,
to replace the on-board timer and mi-
crocontroller’s clock. You are enabled
to control the microcontroller’s clock
using the 33220A function generator
and to observe the resulting output
from the U3000A training board.^†
† User is required to supply VREF (+) with +10 and VEE (-) with -15 V externally with a DC
power supply for mode three to mode eight.
4