N2808A Datasheet, PDF (4/13 Pages) Keysight Technologies – PrecisionProbe for the 9000 Series

04 | Keysight | N2808A PrecisionProbe for the 9000 Series - Data Sheet
Solution - PrecisionProbe
PrecisionProbe for the 9000 can solve the problems outlined in
the background information by allowing quick characterization
of your entire probe system (including cables and switches). The
award winning, innovative technology takes advantage of the
calibration output of the 9000 Series oscilloscopes to properly
characterize cables and probes.
The software quickly (less than five minutes in most cases)
and accurately characterizes the desired element in the system
without the need for additional test and measurement equipment.
PrecisionProbe
–– Removes unwanted cable loss
–– Characterizes probe input impedance
–– Properly Creates Custom Probe Transfer
Function = VOut / VIn or VOut/VInc = VOut/VSrc
Now every probe and cable in your system can have the exact
same frequency response probe to probe or cable to cable,
without the inaccuracies that using one model can produce.
Custom probes can now be properly characterized and unwanted
responses can be removed. Not only does PrecisionProbe
characterize the cables, it allows for immediate use on the same
instrument. You can characterize your measuring system and be
using it within five minutes without adding more complicated,
expensive equipment. PrecisionProbe saves time and money
while increasing accuracy. When combining Infiniimax probes
with switches between the amplifier and the probe head,
PrecisionProbe allows for full correction and automation of
each probes path. Full automation is then available to allow for
swapping of the inputs and never leaving the automation.