U3040AK Datasheet, PDF (3/8 Pages) Keysight Technologies – Agilent Yellowstone 3.0 Automated Test Process Center

Thermal and vibration test
station (U3040AK02)
The thermal and vibration test
station provides automated
electrical interconnect between
your UUT and your measurement
equipment, and simultaneously
applies specified thermal and
vibration profiles to the UUT.
(Note: typically the shaker and
fixture provided by others.)
• Full parametric test under
temperature and vibration
• Temperature range typically from
0 to 60 degrees C
• Thermal stability typically within
90 minutes to ±3 degrees without
pre-soak test station
• Typical vibration profiles up to
8 G’s of force (RMS), 20Hz to 3KHz
• Vibration control typically within
±3 dB
UUT under
thermal enclosure Production line
Tray with vehicle
Thermal test unit
Vibration
unit
Figure 3. Thermal and vibration test station
Transfer gate (U3040AK03)
The transfer gate provides a manual
transfer location for UUTs into and
out of the Yellowstone 3.0 process
center. The transfer gate may also
support custom-designed UUT
connection checks as part of the
UUT installation process.
Transfer
gate
Ingress/egress
point
Figure 4. Transfer gate
3