|
N1411A Datasheet, PDF (3/16 Pages) Keysight Technologies – Femto/Picoammeter and Electrometer/High Resistance Meter | |||
|
◁ |
03 | Keysight | B2980A Series Femto/Picoammeter and Electrometer/High Resistance Meter - Data Sheet
The Worldâs Only Graphical Picoammeter/Electrometer that can
Confidently Measure Down to 0.01 fA and Up to 10 PΩ
0.01 fA digit
Battery
Best-in-class 2 pA to 20 mA
current measurement ranges
and internal 1,000 V sourcing
capability ensure accurate
0.01 fA and 10 P⦠measurements
Battery operation eliminates
AC power line noise from
measurements
Time domain view (roll view)
enables capture of transient
signal effects and selection of
desired measurement data
Real-time histogram provides
quick statistical analysis of
measurement data
Test Setup Integrity Checking
function and dedicated
accessories ensure maximum
measurement accuracy
B2980A Series Key Features
ââ 0.01 fA (10-17 A) minimum measurement resolution and 2 pA to 20 mA current
ââ measurement ranges with 6.5 digits resolution
ââ < 20 μV burden voltage in its lowest current range
ââ High speed reading rate up to 20,000 rdg/s
ââ Battery operation models for line noise free measurements1
ââ Built-in ± 1,000 V voltage source2
ââ Measurement resistances up to 10 PΩ (1016 Ω)2
ââ > 200 TΩ input impedance for up to 20 V voltage measurement2
ââ Independent current and voltage measurement2
ââ Charge measurement down to 2 nC range with 6.5 digits resolution2
ââ Temperature and humidity measurements2
ââ Graphical viewing modes (Meter, Graph, Histogram and Roll View)
ââ Easy-to-use auto navigation to select optimal range and aperture
ââ Optional Test Setup Integrity Checker function for noise source isolation
ââ Versatile interface (USB 2.0: LAN, GPIB, LXI Core)
ââ USB (front): store data, save/recall setup information
ââ Free PC control software
1.â B2983A and B2987A
2.â B2985A and B2987A
Application Examples
ââ Material science (Biomaterials, ceramics, elastomers, films, dielectric materials,
electrochemical, ferroelectric materials, graphene, metals, organic materials, nano-
materials, polymers, semiconductors, etc.)
ââ Devices & electronic components (capacitors, resistors, diodes, sensors, transistors
including TFT and CNT, optoelectronics, solar cells, etc.)
ââ Electronic/non-electronic systems (ion beam, electron beam, sensing systems,
particle measurements, embedded precision instruments, etc.)
Why is 0.01 fA resolution
important?
Many materials science and device
characterization applications require
the ability to measure very small
currents that conventional DMMs
(digital multi-meters) cannot handle.
Since the B2980A series provides
a best-in-class 0.01 fA current
measurement resolution in both
its Femto/Picoammeter and
Electro-meter versions, it can
perform precise and detailed
measurements that were previously
impossible using conventional
picoammeÂters and electrometers.
Therefore, you are assured that your
current measurement requirements
will be met well into the future.
Typical current
measurement ranges
10 A
1A
1 mA
1 μA
1 nA
1 pA
1 fA
|
▷ |