N1019A Datasheet, PDF (3/11 Pages) Keysight Technologies – N1019A User Defined Application

Transform Complexity into Simplicity
The typical communications standard has many tests and associated conditions.
An excerpt from the 28G-SR specification table from the CEI 3.0 Implementation
Agreement is below. The designer often uses valuable development time to
create test routines when verifying operation to the standard or custom tests.
These tests can be easily automated using the N1019A.
Characteristic
Baud Rate
Output Differential Voltage
Differential Resistance
Differential Termination Resistance Mismatch
(see Table 1-2)
Output Rise and Fall Time (20% to 80%)
Common Mode Noise
Differential Output Return Loss
Common Mode Output Return Loss
Symbol
T_Baud
T_Vdiff
T_Rd
T_Rdm
T_tr, T_tf
t_Nom
T_SDD22
T_SCC22
Output Common Mode Voltage
T_Vcm
Minimum
19.90
800
80
8
–100
Typical
100
Maximum
28.05
1200
120
10
12
–6
–4
1700
Unit
Gsym/s
mVppd
Ω
%
ps
mVrms
dB
dB
mV
The N1019A user defined application
tool enables you to quickly enter
and organize your tests, set limits,
configure how measurements should
be made, and review results. During
product development, you can
return to the application that you’ve
developed to run individual or suites
of tests, and to add more tests.
This means performing previously-
repetitive test development only once,
which simplifies your testing.
Many designers are already familiar
with the N5467A user defined
application tool that is available for
Keysight real-time oscilloscopes.
The N5467A has been enhanced to
also work with the 86100D DCA-X
digital communications analyzer and
the license is available for purchase
as the N1019A. The initial dialog
allows the user to choose which
oscilloscope platform is being used.
You may develop the application on
your DCA-X or computer without a
license. Once you would like to run
the application to perform testing,
you install the N1019A license on
the DCA-X or computer where the
FlexDCA interface is being used.
3