S-SERIES Datasheet, PDF (25/42 Pages) Keysight Technologies – Infiniium S-Series High-Definition Oscilloscopes

25 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Probes Overview
S-Series oscilloscopes include both 1 MΩ and 50 Ω paths. This
expands their flexibility by making them compatible with a wider
range of probes than high-performance oscilloscopes that only
support a 50 Ω path.
All S-Series oscilloscopes ship standard with four passive probes
and support a wide range of about 100 compatible current and
voltage probes. The table below highlights probes commonly
used with the S-Series.
See
http://literature.cdn.keysight.com/litweb/pdf/5968-7141EN.pdf
for additional info on probes andaccessories.
Probe type
Passive probe
InfiniiMax active probe
InfiniiMode active probe
Single-ended active probe
General purpose differential probes
Current probe
Passive probes
Power rail probe
Ideal for measuring
Single-ended voltage up to 500 MHz
Differential or single-ended voltage
Differential, single-ended or common mode voltage
Single-ended, differential, or common mode voltage
Single-ended voltage up to 2 GHz
High voltage differential signal up to 7 kV with high CMRR
High current, AC/DC (mA – 100’s of A)
High sensitivity current, AC/DC (10’s of uA – A)
High voltage up to 4 kV peak pulse
General purpose up to 1.5 GHz
Single-ended up to 2 GHz with up to ± 24 V offset
Recommended probe model numbers
N2873A (qty. 4 ship standard)
1130A/31A/32A/34A, 1168A/69A
N2830A/31A/32A (InfiniiMode)
N2750A-52A
N2795A, N2796A, N2797A (extreme temperature)
N2790A, N2791A, N2818A, N2819A, N2891A
1146B, 1147B, N2780B-83B, N2893A
N2820A, N2821A
10076B
N2870A – N2876A
N7020A