N9912A-111 Datasheet, PDF (23/34 Pages) Keysight Technologies – Handheld Analyzer

AM/FM Tune and Listen
Description
Audio demodulation types
Audio Bandwidth
Receiver IF Bandwidth
AM
FM Narrow
FM Wide
Listen Time Range
AM, FM Narrow, FM Wide
16 kHz
35 kHz
12 kHz
150 kHz
0 to 100 seconds
Audio Signal Strength Indicator
Audio Signal Strength Indicator helps locate signals. The tone and frequency of the beep varies with signal strength.
Radio Standards
With a Radio Standard applied, pre-defined frequency bands, channel numbers or Uplink / Downlink selections can be used
instead of manual frequency entry. The pre-defined FieldFox Radio Standards include bands such as W-CDMA, LTE, and GSM.
Custom Radio Standards can also be defined, imported, and applied to the FieldFox.
FieldFox Power Suite Measurement types
Channel Power, Occupied Bandwidth, and Adjacent Channel Power Ratio
Preamplifier
Frequency Range
Gain
Specification
100 kHz to 4/6 GHz
Typical
10 minute warm up
22 dB
Interference Analyzer
Spectrogram display
Waterfall angle
Markers
Trace playback and recording
Description
Overlay, full screen, top, or bottom with active trace
Moderate, steep, gradual, wide angle
Time, delta time
Record all spectrum analyzer measurements
Store data internally/USB/SD card
Playback recorded data using FieldFox
Frequency mask trigger allows recording to occur upon trigger
23