N9925A Datasheet, PDF (22/48 Pages) Keysight Technologies – FieldFox Handheld Analyzers

22 | Keysight | FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz - Data Sheet
Spectrum Analyzer (continued)
Frequency and time specifications (continued)
Sweep time, zero span
Range
Resolution
Readout
Trigger (for zero span and FFT sweeps)
Trigger type
Trigger slope
Trigger delay
Auto trigger
Trigger position (zero span)
RF burst trigger
Dynamic range
Bandwidth
Operating frequency range
Sweep (trace) point range
All spans
Resolution bandwidth (RBW)
Range (-3 dB bandwidth)
Zero span
Non-zero span
Selectivity (−60 dB / −3 dB)
Bandwidth accuracy
Zero span
Non-zero span
Video bandwidth (VBW)
Nominal
N991xA, N993xA: 1 μs to 1000 s
N995xA, N996xA: 1 μs to 6000 s
100 ns
Entered value representing trace horizontal scale range
Free run, external, video, RF burst
Positive edge, negative edge
Range: -150 ms to 10 s
Resolution: 100 ns
Forces a periodic acquisition in the absence of a trigger event
Range: 0 (off) to 10 s
Controls horizontal position of the pulse edge; use sweep time to zoom into pulse edge
Range: 0 to 10, integer steps; 0 is left edge of graticule, 10 is right edge of graticule
Nominal
40 dB
20 MHz
20 MHz to maximum instrument frequency
101, 201, 401, 601, 801, 1001 (defaults to 401); arbitrary 2 to 10,001 settable through SCPI
10 Hz to 5 MHz
1 Hz to 5 MHz
4:1
10 Hz to 1 MHz
3 MHz
5 MHz
1 Hz to 100 kHz
300 kHz to 1 MHz
3 MHz
5 MHz
1 Hz to 5 MHz
1, 3, 10 sequence
1, 1.5, 2, 3, 5, 7.5, 10 sequence < 300 kHz, 300 kHz,
1 MHz, 3 MHz, 5 MHz
Step keys change RBW in 1, 3, 10 sequence
Nominal
± 5%
± 10%
± 15%
± 1%
± 5%
± 10%
± 15%
1, 1.5, 2, 3, 5, 7.5, 10 sequence