89601B Datasheet, PDF (20/23 Pages) Keysight Technologies – 89601B/BN-200 Basic Vector Signal Analysis

20 | Keysight | 89601B/BN-200 Basic Vector Signal Analysis, 89601B/BN-300 Hardware Connectivity, 89600 VSA Software - Technical Overview
Hardware connectivity (Option 300)
For a complete list of specifications refer to the measurement platform literature.
Supported hardware
For a complete list of currently supported hardware, go to www.keysight.com/find/89600_hardware
Description Models
supported
Input
channels
Baseband MIMO
(I/Q)
Analysis
Bandwidth¹
Frequency
Range¹
EVM
Applications
Performance^{1, 2}
X-Series signal N9000A, N9010A,
analyzers
N9020A, N9030A
1, 2 if
Yes,
N9010 or optional
N9020 slaved
together⁴
MXE EMI
receiver
N9040B
N9038A
1 RF
No
PSA spectrum
analyzer
ESA spectrum
analyzer
Infiniium
oscilloscopes
E4440A, E4443A,
E4445A, E4446A,
E4447A, E4448A
ESA-E Series
8064, 8104,
9064, 9104⁷,
9254, 9404,
80204, 80304,
80404, 80604,
80804, 81004,
81204, 81304,
90254, 90404,
90604, 90804,
91204, 91304,
X91304, X91604,
X92004, X92504,
X92804, X93204,
X92004Q,X92504Q,
X93304, X95004Q,
X96204Q, 9024H,
9054H, 9104H,
9204H, S054A,
S104A, S204A,
S254A, S404A,
S604A, S804A
Z204A, Z254A,
Z334A, Z504A,
Z634A
1, 2 if
No
2 units slaved
together
1
No
1, 2, 3, 4
Yes,
including
dual I+jQ
2x2 MIMO
with dual
N9010 or
N9020A
analyzers, time
synchronous
only⁴
No
2x2
No
Up to 160 MHz;
25 MHz max for
slaved units
Up to 510 MHz
10 MHz Stan-
dard, 25 MHz
with Option B25
Up to 80 MHz;
8 MHz max for
slaved units
10 MHz
Up to 50 GHz
8.4 GHz
(Option 508),
26.5 GHz
(Option 526)
44 GHz
(Option 544)
Up to 50 GHz
Up to 26.5 GHz
Up to 4x4,
including
baseband
61 GHz
(62.5 GHz with
reduced alias
protection)
61 GHz
(62.5 GHz with
reduced alias
protection)
0.50% rms -
1.5% rms³
TBD
Not Available
0.50% rms -
1.5% rms⁵
0.40% rms -
1.8% rms⁶
Not available
Low cost to high
performance
baseband, RF,
2-ch MIMO
CISPR compli-
ance testing,
multiple mea-
surement ap-
plications (like
phase noise)
High
performance RF
Economy RF
analysis
Wide band-
width; base-
band; economic
MIMO analysis
1.  Depending on model/option.
2.  On QPSK signal; full scale signal, fully contained in the measurement span; random data sequence; start frequency ≥15 % of span; alpha/BT ≥0.3; symbol
rate ≥ 1 kHz; averaging = 10; Requires Option AYA. Data provided for comparison purposes only.
3.  Frequency <3.6 Ghz; range ≥-30 dBm.
4.  Option B40 is not supported (i.e. if any analyzer has Option B40, it cannot be used together with another analyzer).
5.  Frequency <3 GHz; range ≥-24 dBm.
6.  Frequency between 30 MHz and 3 GHz; range ≥-20 dBm.
7.  Full sample rate = 10 Gsa/s.