N1010A Datasheet, PDF (2/2 Pages) Keysight Technologies – Expect More From Your Test Equipment

Ofline Operation
The PC-based application frees up
equipment by allowing designers to
perform measurements and simula-
tions on saved waveforms or software
generated signals.
Of course, if you already installed a
software license on your DCA, you
don’t have to purchase another one.
While connected to an 86100C/D,
N1010A FlexDCA uses software
licenses that are licensed to either the
PC or the instrument.
When operating offline, N1010A will
make use of software options licensed
to the PC only. Instrument-based
licenses are not available.
The graphical signal processing interface
makes it easy to setup and display math
functions and other types of simulations.
Ordering Information
Perform scope, eye/mask, and jitter
measurements using saved waveforms or
use the built-in waveform simulator
Waveform Simulator
N1010A FlexDCA includes an
integrated waveform simulator. The
simulator can create patterns such
as PRBS, square waves, sinusoids,
or import a saved waveform from
a file. It also allows you to add
simulated random jitter/noise as well
as periodic jitter/noise to the signal.
The waveform simulator is ideal for
performing “what-if” simulations such
as working with different de-embedding
files.
N1010A FlexDCA software
can save you money!
Purchase a single software license
for your PC and use it with multiple
86100C/D mainframes! N1010A
FlexDCA offers the same software
options that are available for the
86100D DCA-X. For example, you can
purchase N1010A-200 Enhanced Jitter
Analysis for your PC and use it with
multiple 86100C or 86100D mainframes,
when connected to the instrument via
LAN.
N1010A FlexDCA takes the powerful user
interface from the 86100D DCA-X and
makes it available on a PC
Get even more out of your
86100C DCA-J
If you already own an 86100C DCA-J
and would like to benefit from FlexDCA
features, then N1010A FlexDCA is
the application for you. In addition to
de-embedding and embedding capability
available through N1010A-SIM
InfiniiSim-DCA, the N1010A FlexDCA
application provides:
– New Measurement Capability
such as Data Dependent
Pulse
– Width Shrinkage (DDPWS),
Uncorrelated Jitter (UJ), J2, J9,
and more
– Advanced Signal Processing
including FFT, differentiate,
integrate, built-in filter functions,
and more
– Customizable vector-based user-
interface ; display only what is
important to you
– Display of up to 64 measurements
simultaneously
– Waveform Simulator with random
and periodic jitter/noise capability
N1010A FlexDCA Remote Access SW
Provides basic Scope and Eye/Mask
measurements N1010A FlexDCA
– N1010A-DCA Support for all
86100C/D mainframe licenses
– N1010A-200 Enhanced Jitter
Analysis
– N1010A-201 Advanced Waveform
Analysis
– N1010A-300 Advanced Amplitude
Analysis/RIN/Q
– N1010A-SIM InfiniiSim-DCA
PC Requirements¹
Recommended OS:
– Windows 7 64-bit
Supported OS:
– Windows Vista 32-bit and 64-bit
– Windows XP 32-bit
– Windows 7 32-bit and 64-bit
1 _{PC is supplied by the user}
For more information, go to
www.keysight.com/find/N1010A
This information is subject to change without notice.
© Keysight Technologies, 2010 - 2014
Published in USA, July 31, 2014
5990-5823EN
www.keysight.com