E4980AL Datasheet, PDF (2/38 Pages) Keysight Technologies – Precision LCR Meter

02 | Keysight | E4980A Precision LCR Meter 20 Hz to 2 MHz, E4980AL Precision LCR Meter 20 Hz to 300 kHz/500 kHz/1 MHz – Data Sheet
Definitions
All specifications apply to the conditions of a 0 to 55 °C temperature range, unless
otherwise stated, and 30 minutes after the instrument has been turned on.
Specifications (spec.): Warranted performance. Specifications include guardbands
to account for the expected statistical performance distribution, measurement
uncertainties, and changes in performance due to environmental conditions.
Supplemental information is provided as information that is useful in operating the
instrument, but is not covered by the product warranty. This information is classified
as either typical or nominal.
Typical (typ.): Expected performance of an average unit without taking guardbands
into account.
Nominal (nom.): A general descriptive term that does not imply a level of performance.
How to Use Tables
When measurement conditions fall under multiple categories in a table, apply the
best value.
For example, basic accuracy Ab is 0.10% under the following conditions;
Measurement time mode SHORT
Test frequency
125 Hz
Test signal voltage
0.3 Vrms
E4980A/E4980AL
The E4980A is the model number of the 20 Hz to 2 MHz frequency range LCR meter.
The E4980AL is the model number of the 20 Hz to 300 kHz, 500 kHz or 1 MHz frequency
range LCR meter. See the E4980A/E4980AL Configuration Guide (5989-8321EN) for
more details.
Frequency range
20 Hz to 2 MHz
20 Hz to 1 MHz
20 Hz to 500 kHz
20 Hz to 300 kHz
Model number and option
E4980A
E4980AL-102
E4980AL-052
E4980AL-032