E1968A Datasheet, PDF (2/22 Pages) Keysight Technologies – GSM/GPRS/EGPRS Test Application

Accelerate production of high volume quality phones at the
lowest possible cost
Flexible
–– The E1968A includes all essential connection types and signaling options necessary for a
complete GSM/GPRS/ EGPRS/E-EDGE manufacturing test solution
–– Some licensed feature options can also be used in R&D and reduce your R&D cycle
Fast
–– Digital ORFS – up to 20x faster
–– Dynamic power – fast automatic signaling and non-signaling method for Tx output power
calibration
–– Phase and amplitude versus time (PAvT) – measurement for calibration of polar modulated
devices
–– Fast device tune (FDT) – faster simultaneous mobile phone Rx and Tx calibration (based on typical
test plan)
–– Discontinuous timeslot TXP – supports simultaneous power measurement for up to 7 timeslots,
reduces phone calibration time
Key features
–– PAvT and IQ capture functionality
–– Enhanced fast device calibration across level and frequency simultaneously
–– E-EDGE2-A signaling and measurement
–– VAMOS type I and type II solutions for mobile R&D and manufacturing
–– Test mode BER reduces your BER measurement time in production without setting up a call
connection; MS calculated BER separates the Rx from Tx test and reduces Rx test time through
multi-phone test scenario
–– Class 45 feature enables simultaneous Tx and Rx measurement of all bursts up to 6 uplink
timeslots
–– Real-time audio codec and DAI interface
–– Free text-type SMS functionality and licensed full functionality SMS
–– Single channel GPS source
–– FM radio source allows easy FM radio phone calibration in production
–– 2-box voice handover between GSM and W-CDMA
GSM/GPRS/EGPRS/E-EDGE Signaling and Base Station Emulation
The E1968A GSM/GPRS/EGPRS/E-EDGE mobile test application gives you the test solution designed
especially for your GSM/GPRS/EGPRS test requirements of transceivers and wireless terminals by
delivering speed and flexibility needed for high-volume, automated production-test environments.
Since this solution is based on the high-performance E5515C/E (8960) wireless communications test
set, you get speed and concurrent measurement capabilities, providing immediate benefits that
translate into a competitive advantage for mobile phone manufacturers. This significantly cuts test
times, helping reduce the manufacturing cost per phone.