N9912A-330 Datasheet, PDF (18/34 Pages) Keysight Technologies – N9912A FieldFox RF

Spectrum Analyzer (continued)
Displayed Average Noise Level (DANL) 10 Hz RBW, 10 Hz VBW, 50 ohm input termination, 0 dB attenuation, average detector
Specification
Typical
10 minute warm up 90 minute warm up
Preamp off
20 to 30 °C
–10 to 55 °C
20 to 30 °C
20 to 30 °C
10 MHz to 2.4 GHz
-
-
-
–130 dBm
> 2.4 to 5.0 GHz
-
-
-
–125 dBm
> 5.0 to 6.0 GHz
-
-
-
–119 dBm
Preamp on
20 to 30 °C
–10 to 55 °C
20 to 30 °C
20 to 30 °C
10 MHz to 2.4 GHz
< –143 dBm
< –141 dBm
-
–148 dBm
> 2.4 to 5.0 GHz
< –140 dBm
< –138 dBm
-
–145 dBm
> 5.0 to 6.0 GHz
< –132 dBm
< –130 dBm
-
–138 dBm
Display Range
Log Scale
Ten divisions displayed; 0.1 to 1.0 dB/division in 0.1 dB steps and 1 to 20 dB/division in 1
dB steps
Traces
Detectors
Normal, Positive Peak, Negative Peak, Sample, Average
States
Number of traces
Clear/Write, Max Hold, Min Hold, Average, View, Blank
Number of averages: 1 to 10,000
4
Reference Level
Range
Resolution
Accuracy
–170 to +30 dBm
0.1 dB
0 dB
18