N1092C Datasheet, PDF (18/20 Pages) Keysight Technologies – N1090A, N1092A/B/C/D/E and N1094A/B DCA-M Optical and Electrical Sampling Oscilloscopes

18 | Keysight | N1090A, N1092A/B/C/D/E and N1094A/B DCA-M Optical and Electrical Sampling Oscilloscopes - Data Sheet
Ordering Information — N1092A/B/C/D/E and N1094A/B
The N1092/4, when controlled by a PC through a USB connection, is a complete measurement
system. No oscilloscope mainframe is required. The N1092 comes standard with optical
reference receivers for 25.78, 26.56, 27.95, and 28.05 Gb/s compliance test. N1092C and
N1092E include 50 GHz electrical channels. The N1094 electrical channels can be configured
with 33 or 50 GHz electrical bandwidths.
Model number
Description
N1092A
One optical channel
N1092B
N1092C
Two optical channels
One optical, two electrical channels
N1092D
Four optical channels
N1092E
Two optical, two electrical channels
N1094A
N1094B
Two electrical channels
Four electrical channels
The following options ¹ are available on all N1092 and N1094 models. The price is the same,
independent of a one, two, or four channel model number:
Option
Description
Option FS1
Increase sampling rate from 100 to 250 kSa/s
Option LOJ
Reduce residual jitter from 400 fs to < 200 fs
Option PLK
Add pattern lock capability
Option 200
Advanced jitter analysis
Option 201
Advanced waveform analysis
Option 300
Advanced amplitude/noise analysis
Option 401
Advanced eye analysis
Option 500
Productivity package (Rapid eye, TDEC)
Option 9FP
PAM-N analysis
Option SIM
Infinisim waveform transformation software
Option COC
Certificate of calibration
Option UK6
Commercial calibration certificate with test data
Option 1CM
Single instrument rackmount kit
Option 1CN
Dual instrument side-by-side rackmount kit
Option EFP
Flex eye independent channel acquisition
Option TFP
IEEE 802.3 TDECQ analysis option
1.  Note that operation of Options 200, 201, 300, 401, 500, 9FP, EFP, TFP, and SIM can be achieved by having
the appropriate licenses installed on the N1092, the computer controlling the N1092, or an 86100 mainframe
used to control the N1092.
The following options are available for the N1092 models. Option prices depend on the model
number and its number of optical channels (one, two or four for the N1092A/C, N1092B/E and
N1092D respectively).
Option
Description
Option 168
25.78 Gb/s TDEC filter (100GBASE-SR4)
Option 206
Option IRC
20.6 Gb/s reference receiver
Extend optical channel bandwidth to 45 GHz (–3 dBo) and allow creation of reference
receiver filters at any data rate from 8 to 42 Gb/s
The following options are available with the N1094A/B.
Option
Description
Option 030
33 GHz electrical channel bandwidth
Option 050
50 GHz electrical channel bandwidth
N1010A FlexDCA software is required on the PC controlling the N101A DCA. It is available as a
free download at www.keysight.com/find/flexdca_download.