Y1175A Datasheet, PDF (14/19 Pages) Keysight Technologies – RF Switch Platform

14 | Keysight | L4490A/91A RF Switch Platform – Data Sheet
Custom Matrix from
Keysight’s Custom Group
Configuration and pricing depends on the
defined configuration. See
www.keysight.com/find/switchmatrix
to find out more.
Example configuration:
A test system is being built that requires
the following microwave switching:
–– (Qty 6) Keysight 87206B
SP6T switches
–– (Qty 8) Keysight N1810UL
SPDT switches
Step 1 Select the required quantity of dis-
tribution boards for the required switches
using Table 2:
–– (Qty 6) Y1152A distribution boards to
control
(Qty 6) 87206B switches
–– (Qty 1) Y1150A distribution
board to control
(Qty 8) N1810UL switches
Step 2 Select switch mounting kits based
on switches selected:
–– (Qty 2) Y1172A mounting
kits to mount
(Qty 6) 87206B switches
–– (Qty 2) Y1170A
mounting kits to mount
(Qty 8) N1810UL switches
Step 3 Select the RF Platform and op-
tions. For 14 switches, the L4491A is
recommended. If more than 4 distribution
boards are needed, then you need to add
Option 002.
Here is the final recommended
configuration:
–– (Qty 6) 87206B DC-20
GHz SP6T switches
with option 161
(Qty 6) Y1152A
distribution boards
(Qty 2) Y1172A
mounting brackets
plus ribbon cables
–– (Qty 8) N1810UL
DC-20 GHz SPDT switches
with options 124, 402, 201
(Qty 1) Y1150A
distribution board
(Qty 2) Y1170A
mounting brackets
plus ribbon cables
–– L4491A w/option 002 for an
additional 64 control lines
See table 2 for recommended switch
options for 24 VDC coils, position indi-
cators and DIP socket connectors.
See the application note:
Keysight 34945A, L4445A & L4490A/
L4491A Configuration Guide
(5989-2272EN) for additional configu-
ration details.