U2021XA Datasheet, PDF (13/20 Pages) Keysight Technologies – U2020 X-Series USB Peak and Average Power Sensors

13 | Keysight | U2020 X-Series USB Peak and Average Power Sensors – Data Sheet
Other software attributes
Display units
Display resolution
Default resolution
Zero
Range
Relative
Offset
Limits
Preset default values
Absolute: Watts or dBm
Relative: Percent or dB
Resolution of 1.0, 0.1, 0.01 and 0.001 dB in log mode; one to four digits in linear mode
0.01 dB in log mode; three digits in linear mode
For performing internal and external zeroing
Sensor-dependent, configurable in 1-kHz steps
Displays all successive measurements relative to the last referenced value
Allows power measurements to be offset by –100 dB to +100 dB, configurable in 0.001 dB increments, to
compensate for external loss or gain
High and low limits can be set in the range between –150.00 dBm to +230.00 dBm, in 0.001 dBm increments
Channel Offset (dB) = 0, Duty Cycle Off, Frequency 50 MHz, AUTO Average, AUTO Range, Free Run Mode,
dBm mode
System Requirements
Hardware
Processor
RAM
Hard disk space
Resolution
Operating system
Operating system
Software
Keysight IO Libraries Suite
Microsoft .NET Framework
Microsoft Visual C++ 2005 Runtime
Libraries ²
Desktop PC: 1.3 GHz Pentium IV or higher recommended
Laptop PC: 900 MHz Pentium M or higher recommended
512 MB (1.0 GB or higher recommended)
1.0 GB or more free disk space at runtime
800 x 600 or higher (1280 x 1024 recommended)
Windows 8 32-bit and 64-bit
Windows 7 32-bit and 64-bit
Windows Vista 32-bit and 64-bit
Windows XP Professional 32-bit Service Pack 2 or higher
Version 15.5 ¹ or higher
Runtime version 3.5
Version 1.0 or higher
1.  Available on the Keysight Automation-Ready CD-ROM. Keysight IO Libraries Suite 15.5 is required if your PC is running on Windows Vista 32-bit
operating system.
2.  Bundled with N1918A Power Analysis Manager CD