U1242C Datasheet, PDF (11/15 Pages) Keysight Technologies – U1240 Series Handheld Digital Multimeters

11 | Keysight | U1240 Series Handheld Digital Multimeters - Data Sheet
Temperature specifications for U1241C / U1242C
Thermal type
K
J⁵
Range
–200 °C to 1372 °C
–328 °F to 2502 °F
–210 °C to 1200 °C
–346 °F to 2192 °F
Resolution
0.1 °C
0.1 °F
0.1 °C
0.1 °F
Accuracy ± (% of reading +
as specified below)
1 % + 1 °C
1 % + 1.8 °F
1 % + 1 °C
1 % + 1.8 °F
Notes
1. The specification above is specified after 60 minutes of warm-up time.
2. The accuracy does not include the tolerance of the thermocouple probe.
3. Do not allow the temperature sensor to contact a surface hat is energized above 30 Vrms or 60 V DC.
Such voltages pose a shock hazard.
4. The temperature calculation is specified according to the safety standards of EN/IEC-60548-1 and
NIST 175.
5. Only for U1242C.
Capacitance specifications for U1241C / U1242C
Range
1000 nF
10 µF
100 µF
1000 µF
10 mF
Resolution
0.1 nF
0.001 µF
0.01 µF
0.01 µF
0.001 mF
Accuracy ± (% of reading +
counts of least significant digit)
1.0 % + 5
1.0 % + 5
1.0 % + 5
1.2 % + 5
1.2 % + 5
Notes
1. Overload protection: 1000 Vrms for short circuits with < 0.3 A current.
2. The accuracy for all ranges is specified based on a film capacitor or better, and after the Null function
is used to subtract the test lead resistance and thermal effect (by opening the test leads).
3. The maximum display is 12000 counts selectable