U2722A Datasheet, PDF (10/15 Pages) Agilent(Hewlett-Packard) – Voltage and current programming and readback

10 | Keysight | U2722A/U2723A USB Modular Source Measure Unit – Data Sheet
U2941A Parametric Test Fixture
Increase your parametric test
efficiency and usability
The Keysight U2941A parametric test
fixture is designed to complement usage
of the Keysight U2722A/U2723A USB
modular source measure unit in the testing
of semiconductor components, including
SMT and DIP ICs. The U2941A comes with
three input channels, a common ground,
and five types of socket modules of various
pin configurations.
Features
–– Closed lid minimizes ESD on sensitive circuits and components
–– Up to 3 source/measure channels supported
–– Different socket modules to match a wide variety of pin configurations
–– Assembly PTFE plate for low-current measurements
–– Comes with the Keysight Parametric Measurement Manager software
The bundled Keysight Parametric
Measurement Manager (PMM) software
also supports the Keysight U2751A USB
modular switch matrix when used with
the U2722A. The PMM software allows for
out-of-box configuration of instruments for
easy set-up, simplifying discrete package
component testing and enabling data
recording.
Figure 3. Sample setup of the U2941A connected directly to the U2722A source measure unit and fastened with
the DIP socket module.
Black plastic fasteners
Socket modules
Figure 4. Socket modules are interchangeable to match pin configuration of device-under-test (DUT).