802.11-WV-GENER Datasheet, PDF (10/17 Pages) Keysight Technologies – 802.11ad Waveform Generation & Analysis Testbed, Reference Solution

10 | Keysight | 802.11ad Waveform Generation & Analysis Testbed, Reference Solution - Solution Brochure
Hardware Elements
The combination of this test equipment provides waveform generation and analysis up to millimeter-wave frequencies with up to 2 GHz
of modulation bandwidth. A Keysight representative can help to recommend the best hardware configuration based on the specific
application needs.
M8190A AXIe 12 GS/s arbitrary waveform generator
www.keysight.com/find/m8190a
The M8190A AWG is used to drive an E8267D PSG vector signal generator equipped with
wideband external I/Q inputs (option 016) to produce modulation bandwidths of up to
2 GHz on carrier signals up to 44 GHz. The M8190A is a 2-channel precision AWG that
can operate with 14-bit resolution at up to 8 GSa/s or 12-bit resolution up to 12 GSa/s. It
has 5 GHz of analog bandwidth and 2 GSa of memory per channel.
E8267D PSG vector signal generator
www.keysight.com/find/e8267d
The E8267D PSG vector signal generator provides wide-band signal generation to 44 GHz
The PSG includes wideband differential external I/Q inputs for modulation bandwidths
up to 2 GHz. For signal generation above 44 GHz, upconverters are available from
Keysight (58 to 64 GHz with N5152A) and N9029AV12 Virginia Diodes Inc. (60 to 90 GHz).
MXG microwave analog signal generators (N5183B) are used to provide the LOs for the
millimeter-wave upconverters.
N5183B MXG microwave analog signal generator
www.keysight.com/find/n5183b
N5183B MXG microwave analog signal generators are used to provide LOs for the
millimeter-wave upconverters and downconverters.
N5152A upconverter & N1999A downconverter
Contact Keysight for details.
The N5152A upconverter and N1999A downconverter were designed specifically for use
with 802.11ad systems. Both the upconverter and downconverter use a 5 GHz IF. The
upconverter has an output power of up to +5 dBm and also includes filters to produce
an image free output. The downconverter uses a preamp to enable low level signals for
analysis. An attenuator is included to optimize system performance.
N9029AV12-UDC/N9029AV15-UDC Millimeter-wave upconverter/
downconverter
www.keysight.com/find/SA_mmwave
The N9029AV15 & N9029AV12 millimeter-wave signal analyzer frequency extension
modules, offered by VDI, Inc., cover the V-Band (50 to 75 GHz) and E-Band (60 to 90
GHz) respectively. The standard units are downconverters, and with option UDC, a
single unit can be configured via jumpers to be either an upconverter or downconverter.
This enables upconverting IF signals from a PSG to millimeter-wave or downconverting
millimeter-wave signals to IF for analysis with an oscilloscope or signal analyzer.