MURF1620CT Datasheet, PDF (2/4 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

MURF1620CT
MAXIMUM RATINGS (Per Leg)
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
Total Device, (Rated V_R), T_C = 150°C
Peak Repetitive Forward Current
(Rated V_R, Square Wave, 20 kHz), T_C = 150°C
Non−repetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
Total Device
Operating Junction and Storage Temperature
RMS Isolation Voltage (t = 1 second, R.H. ≤ 30%, T_A = 25°C) (Note 3)
Per Figure 3
Per Figure 4 (Note 2)
Per Figure 5
THERMAL CHARACTERISTICS (Per Leg)
Rating
Maximum Thermal Resistance, Junction to Case
Lead Temperature for Soldering
Purposes: 1/8″ from the Case for 5 seconds
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Maximum Instantaneous Forward Voltage (Note 4)
(i_F = 8.0 Amp, T_C = 150°C)
(i_F = 8.0 Amp, T_C = 25°C)
Maximum Instantaneous Reverse Current (Note 4)
(Rated dc Voltage, T_C = 150°C)
(Rated dc Voltage, T_C = 25°C)
Maximum Reverse Recovery Time
(I_F = 1.0 Amp, di/dt = 50 Amp/ms)
(I_F = 0.5 Amp, i_R = 1.0 Amp, I_REC = 0.25 Amp)
2. UL Recognized mounting method is per Figure 4
3. Proper strike and creepage distance must be provided.
4. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
Symbol
V_RRM
V_RWM
V_R
I_F(AV)
I_FM
I_FSM
T_J, T_stg
V_iso1
V_iso2
V_iso3
Symbol
R_qJC
T_L
Symbol
v_F
i_R
t_rr
Value
200
8
16
16
100
− 65 to +150
4500
3500
1500
Value
4.2
260
Value
0.895
0.975
250
5.0
35
25
Unit
Volts
Amps
Amps
Amps
°C
Volts
Unit
°C/W
°C
Unit
Volts
mA
ns
100
50
20
10
5.0
2.0
1.0
T_J = 100°C
25°C
0.3
0.1
0.2
0.4
0.6
0.8
1.0
v_F, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage, Per Leg
10 k
1.0 k
400
100
40
10
2.0
1.0
0.4
0.1
0.04
0.01
1.2
0
T_J = 100°C
25°C
20 40 60 80 100 120 140 160 180 200
V_R, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current, Per Leg*
http://kersemi.com
2