MBRF20H150CT Datasheet, PDF (2/3 Pages) Kersemi Electronic Co., Ltd. – Plastic package has Underwriters Laboratory Flammability Classification 94V-0

MBR20H150CT, MBRF20H150CT & MBRB20H150CT-1 Series
Maximum Ratings (TC = 25°C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Total device
Per leg
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
Peak repetitive reverse current per leg at tp = 2µs, 1KHZ
Peak non-repetitive reverse surge energy per leg
(8/20µs waveform)
Non-repetitive avalanche energy per leg
at 25°C, IAS = 1.5A, L=10mH
Voltage rate of change (rated VR)
Operating junction and storage temperature range
Symbol
VRRM
VRWM
VDC
IF(AV)
IFSM
IRRM
ERSM
EAS
dv/dt
TJ, TSTG
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1 second, RH ≤ 30%
VISOL
Electrical Characteristics (TC = 25°C unless otherwise noted)
Parameter
Symbol
Maximum instantaneous
IF = 10A, TC = 25°C
forward voltage per leg at⁽⁴⁾: IF = 10A, TC = 125°C
IF = 20A, TC = 25°C
VF
IF = 20A, TC = 125°C
Maximum reverse current per leg
at working peak reverse voltage
TJ = 25°C
TJ = 125°C
IR
Thermal Characteristics (TC = 25°C unless otherwise noted)
Parameter
Symbol
Typical thermal resistance per leg
RΘJC
Notes:
(1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset
(2) Clip mounting (on case), where leads do overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”)
(4) Pulse test: 300µs pulse width, 1% duty cycle
MBR20H150CT
150
150
150
20
10
200
1.0
10
11.25
10,000
–65 to +175
4500 ⁽¹⁾
3500 ⁽²⁾
1500 ⁽³⁾
Value
0.90
0.75
0.99
0.86
5.0
1.0
MBR
2.2
MBRF
4.2
MBRB
2.2
Unit
V
V
V
A
A
A
mJ
mJ
V/µs
°C
V
Unit
V
µA
mA
Unit
°C/W
www.kersemi.com
2